Solving Problems; Beep Codes - Dell STUDIO XPS Setup Manual

Dell computer monitor - monitor user manual
Hide thumbs Also See for STUDIO XPS:
Table of Contents

Advertisement

Solving Problems

This section provides troubleshooting
information for your computer. If you are unable
to solve your problem using the following
guidelines, see "Using Support Tools" on
page 33 or "Contacting Dell" on page 53.
WARNING: Only trained service personnel
should remove the computer cover. See
the Service Manual on the Dell Support
website at support.dell.com for advanced
service and troubleshooting instructions.
WARNING: Before working inside your
computer, read the safety information that
shipped with your computer. For additional
safety best practice information, see the
Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
26

Beep Codes

Your computer might emit a series of beeps
during start-up if the monitor cannot display
errors or problems. The following repetitive
beep codes help you troubleshoot problems
with your computer.
NOTE: To replace parts, see the Service
Manual on the Dell Support website at
support.dell.com.
One beep — BIOS ROM checksum failure;
possible motherboard failure
Contact Dell (see "Contacting Dell" on page 53).
Two beeps — No RAM detected
Remove the memory modules, reinstall
one module and restart the computer. If
the computer starts normally, reinstall an

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio xps dcrmStudio xps 435mt

Table of Contents