Test Configuration 3-Hp Proliant Bl460C G5 Server; Supported Servers And Enclosures - Compaq BL10e - HP ProLiant - 512 MB RAM Introduction Manual
Dynamic power capping tco and best practices white paper (emea edition)
Hide thumbs
Also See for BL10e - HP ProLiant - 512 MB RAM:
- Setup and installation manual (156 pages) ,
- Supported configurations (35 pages) ,
- User manual (30 pages)
Table of Contents
Advertisement
Test Configuration 3—HP ProLiant BL460c G5 Server
16 HP ProLiant BL460c G5 Servers
2 Intel® Xeon® Processor L5430
4 4GB PC2-5300 DDR2 Fully Buffered Low-Power DIMMs
2 Hot Plug SFF SAS 10K 72GB Hard Drives in a RAID 1 Configuration
ROM Revision: I23 9/29/08
iLO Revision: v1.70 pass 11
1 HP BladeSystem c7000 Enclosure
10 Fans (Rev F, 12v)
4 Power Supply Units
2 HP 1Gb Ethernet Pass-Thru Modules
2 Onboard Administrator Module v2.30, pass 10
Power: 208VAC
Circuit Size: 8.6kW (30 Amp, 3-phase)
Operating Temperature: 22°C ±0.5°C
Power calculated using HP BladeSystem Sizer v3.4.1
Power measured using Voltech PM1000 Power Analyzer
Supported Servers and Enclosures
Dynamic Power Capping supported on the following servers and enclosures:
HP BladeSystem c7000 enclosure
HP ProLiant BL 2x220 G5 server
HP ProLiant BL260 G5 server
HP ProLiant BL460c G1 server
HP ProLiant BL460c G5 server
HP ProLiant BL495c G5 server
HP ProLiant BL685 G5 server
HP ProLiant DL360 G5 server
HP ProLiant DL380 G5 server
14
Advertisement
Table of Contents
Need help?
Do you have a question about the BL10e - HP ProLiant - 512 MB RAM and is the answer not in the manual?
Questions and answers