Appendix: Tco Test Configurations And Supported Servers; Test Configuration 1-Hp Proliant Dl380 G5 Server; Test Configuration 2-Hp Proliant Bl460C G1 Server - Compaq BL10e - HP ProLiant - 512 MB RAM Introduction Manual

Appendix: TCO Test Configurations and Supported
Servers
The following tables contain the configuration of the servers as tested.
Test Configuration 1—HP ProLiant DL380 G5 Server
1 HP ProLiant DL380 G5 server
2 Quad-Core Intel® Xeon® Processor E5450
8 1GB PC2-5300 DDR2 Fully Buffered Low-Power DIMMs
4 Hot Plug SFF SAS 10K 72GB Hard Drives in a RAID 5 Configuration
2 Power Supply Units
ROM Revision: P56 9/1/08
iLO Revision: v1.70 pass 11
Power: 208VAC
Circuit Size: 8.6kW (30 Amp, 3-phase)
Operating Temperature: 22°C ±0.5°C
Power calculated using HP Power Calculator REV111601
Power measured using Voltech PM1000 Power Analyzer
Test Configuration 2—HP ProLiant BL460c G1 Server
16 HP ProLiant BL460c G1 Servers
2 Intel® Xeon® Processor L5450
4 4GB PC2-5300 DDR2 Fully Buffered Low-Power DIMMs
2 Hot Plug SFF SAS 10K 72GB Hard Drives in a RAID 1 Configuration
ROM Revision: I15
iLO
1 HP BladeSystem c7000 Enclosure
10 Fans (Rev D, 48v)
6 Power Supply Units
2 HP 1Gb Ethernet Pass-Thru Modules
2 Onboard Administrator Modules
Power: 208VAC
Circuit Size: 8.6kW (30 Amp, 3-phase)
Operating Temperature: 22°C ±0.5°C
Power calculated using HP BladeSystem Sizer v3.4.1
Power measured using Voltech PM1000 Power Analyzer
13