Tektronix TDS3000B Series Reference page 9

the last autoset.
Detection
On Off
Enables or disables the
WaveAlert Waveform Anomaly
Detection function. See page
13,
Sensitivity
nn.n%
Sets the comparison sensitivity,
Use the general purpose knob
to set sensitivity from 0% (least
sensitive) to 100% (most sensi-
Beep On
Anomaly
On_ Off
When On, the oscilloscope
beeps if it detects a waveform
anomaly on any active channel.
Stop On
Anomaly
On OF
When On, the oscilloscope
stops waveform acquisition if
there is a waveform anomaly on
any channel, The input wave-
forms and anomalies remain
dispiayed on the screen.
12
drive:
13