Array Configuration - Compaq 195294-001 - ProLiant - ML370R Quick Install Manual

14. Verify that the following items are disabled:
G
Software Error Recovery
G
Standby Recovery Server
G
UPS Shutdown
Use the arrow keys to select the options and the Enter key to modify
them as necessary.
15. Page down to
Embedded-Compaq Integrated Dual Channel Wide Ultra2 SCSI
Controller (Port2).
G
Select
Controller Order,
G
Select and press F10. The
First
G
Press Enter to accept the changes.
16. Press F10 to exit the
configuring your computer
17. Use the arrow keys to select
The
Step 5: Save and exit
18. Select
Save the configuration and restart the computer
window displays.
Reboot
19. Press Enter. The
Array Configuration Utility
indicates that no array controllers were detected. This message is an
expected error message.
20. Click OK to exit the Array Configuration Utility. The system reboots.
21. Wait while the system partition installation completes. The server
reboots and sets up hardware. After multiple reboots, the
SmartStart-Manual Path
22. Create a firmware diskette at this time if you are completing this step on
node 1. You will use this diskette later to upgrade the RA4000 controller
firmware. If performing this procedure on node 2, skip this step and
continue with the section "Updating Controller Firmware."
To create a firmware diskette, obtain one DOS formatted diskette, and
follow these steps:
a. Click the Create Support Software button.
b. Click the plus sign (
and then press Enter.
Configuration Changes
Step 3: View or edit details
window displays.
Step 5: Save and exit
window displays.
loads and an error message
window displays.
) next to .
+ Compaq
Installing Cluster Software 3-5
screen displays.
window. The
Steps in
, and then press Enter.
, and then press Enter. A
Compaq