Compaq 195294-001 - ProLiant - ML370R Quick Install Manual page 13

I
For clusters using ServerNet™ I interconnect:
G
One ServerNet I PCI adapter installed into slot 1 of each server
G
Two ServerNet I cables
Storage Components
The U/300 kit for the ProLiant ML370 server supports the following storage
hardware components:
I
One RA4100 storage subsystem, including one Compaq StorageWorks
RAID Array 4000 (RA4000) primary array controller
I
One RA4000 redundant array controller
I
Two GBIC-SWs, one in each controller
I
Two 9.1-GB or larger disk drives, one in each slot 0
I
Two multimode Fibre Channel cables
Cluster Interconnect
ProLiant Clusters for SCO UnixWare 7 with the ProLiant ML370 server can
use either a high-speed ServerNet I network or a dedicated, private Ethernet
network to connect the cluster nodes. The cluster nodes use the interconnect
data path to support the following cluster features:
I
Cluster-wide file system
I
Cluster-wide process management, migration, and load balancing
I
Cluster-wide networking and Cluster Virtual IP (CVIP)
I
Cluster-wide system administration and management
The ServerNet I cluster interconnect uses two ServerNet I PCI adapters and
two ServerNet I cables to connect the nodes. The Ethernet cluster interconnect
uses the embedded NICs and an Ethernet crossover cable to connect the two
nodes.
Clustering Overview 1-3