. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-32 Diagnostic Tools
Primary Processor Test Error Codes
Error Code
122-xx
123-xx
199-xx
Memory Test Error Codes
The 200 series of Diagnostic error codes identifies failures with the memory subsystem.
Corrective action may require replacement of the memory expansion board, the memory
modules, or the processor assembly.
Error Code
200-xx
201-xx
202-xx
Description
Multiprocessor Dispatch test failed.
Interprocessor Communication test
failed.
Installed devices test failed.
Memory Test Error Codes
Description
Invalid memory configuration.
Memory machine ID test failed.
Memory system ROM checksum
failed.
Continued
Recommended Action
1. Check the system configuration
and
retest.
2. Replace the processor board
and retest.
3. Replace the system board and
retest.
1. Check the system configuration
and retest.
2. Verify cable connections and
retest.
3. Check switch and/or jumper
settings and retest.
4. Run the Configuration utility
and retest.
5. Replace the processor board
and retest.
6. Replace the system board and
retest.
Table 3-3
Recommended Action
Reinsert memory modules in
correct location and retest.
The following steps apply to error
codes 201-xx and 202-xx:
1. Replace the system ROM and
retest.
2. Replace the processor board
and retest.
3. Replace the memory
expansion board and retest.