Memory Test Error Codes - Compaq ProLiant 6000 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .

Memory Test Error Codes

The 200 series of Diagnostic error codes identify failures with the memory subsystem.
Corrective action may require replacement of the memory expansion board, the memory
modules, or the processor assembly.
Error Code
200-xx
201-xx
202-xx
203-xx
204-xx
205-xx
206-xx
207-xx
208-xx
210-xx
215
Memory Test Error Codes
Description
Invalid memory configuration
Memory machine ID test failed
Memory system ROM checksum failed
Memory write/read test failed
Memory address test failed
Walking I/O test failed
Increment pattern test failed
Invalid memory configuration-check
DIMM installation. DIMMs installed
have 8K refresh.
Invalid memory speed detected - check
DIMM installation. Slow DIMMs may
cause data loss.
Random pattern test failed.
Non-functioning DC-DC converter for
processor X.
Table 3-3
Recommended Action
Reinsert memory modules in
correct location and retest.
The following steps apply to error
codes
201-xx and 202-xx:
1. Replace the system ROM and
retest.
2. Replace the processor board and
retest.
3. Replace the memory expansion
board and retest.
The following steps apply to error
codes
203-xx through 210-xx:
1. Replace the memory module and
retest.
2. Replace the processor board and
retest.
3. Replace the memory expansion
board
and retest.
Replace DIMMs.
Replace DIMMs with timing greater
than
60 ns.
The following steps apply to error
code
210-xx:
1. Replace the memory module and
retest.
2. Replace the processor board and
retest.
3. Replace the memory expansion
board and retest.
Replace the DC-DC converter
(processor power module).
Compaq ProLiant 6000 Servers Maintenance and Service Guide
3-31