urmet domus IPerCom VOG 7 Booklet page 9

1.9 diSpLAYinG of AnY AdditionAL CALL StAtion CAMerAS
It is possible to display the images taken by any additional cameras in the following 2 ways:
1. Waiting for a response (while receiving a call)
• Pass your hand once on the video door phone while receiving a call, the display shows the following
screen and highlights the icon for displaying images taken by the cameras.
• After a few seconds, the display shows the image taken by the first additional camera on the call
station.
• Pass your hand once to display the image taken by the next camera, if any, the display shows the
following screen and highlights the camera cycle icon.
• After a few seconds, the display shows the image taken by the next camera.
<1 s
1
BEEP
2. in auto-on mode
• Switch on the display (see voice command
• Activate auto-on (see gesture command
• Then pass your hand once to display the image taken by the next camera, if any, the display shows
the following screen and highlights the camera cycle icon.
• After a few seconds, the display shows the image taken by the next camera.
DS1761-030
2
Switching on the
Auto-on
<1 s
1
BEEP
<1 s
3
BEEP
display).
function).
2
4
9