Page 2
13. Power cord D. Hose setting 14. Hose inlet cap Case fastening accessory 15. Hose inlet Dust bag replacement 16. M-class sticker G. Filter replacement 17. Marking plate H. Gasket and float cleaning 18. Workstation mounting point Mirka® DEXOS 1217 M AFC...
Mirka Ltd, 66850 Jeppo, Finland declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which this declaration relates are in conformity with the following standards or other normative documents: EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021, EN 60335-2-69:2012, EN 62233:2008 + AC:2008, EN 62311:2008, EN IEC 62311:2020, EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A2:2021, EN 300 328 V2.2.2, EN 301 489-...
25 kPa 25 kPa Max. vacuum (hPa) 250 hPa 250 hPa 250 hPa Max. vacuum (in 100 in 100 in 100 in Sound pressure level LPA (IEC 60335- 77,7 dB(A) 77,7 dB(A) 77,7 dB(A) 2-69) Mirka® DEXOS 1217 M AFC...
Page 16
Flammable, explosive dust (e.g. magnesium or aluminium dust, etc.) Electrical components Danger: The upper section of the machine contains live components. Contact with live components leads to serious or even fatal injuries. Never spray water on to the upper section of the machine. Mirka® DEXOS 1217 M AFC...
Do not damage the mains power cord (e.g. by driving over it, pulling or crushing it). Regularly check whether the power cord is damaged or shows signs of ageing. If the power cord is damaged, it must be replaced by an authorized Mirka distributor or similar qualified person in order to avoid a hazard.
Page 18
Caution: If the motor cooling filter is clogged by dust the over heating indication might be triggered and the motor stopped, clean the motor cooling filters and allow the dust extractor to cool for approximately 5 minutes. 8. Wet pick-up Mirka® DEXOS 1217 M AFC...
Page 19
Dust bag full. Insert a new dust bag Filter element clogged. Check AFC function and clean the filter. Replace filter if necessary Monitoring electronics malfunction. Send the dust extractor to a Mirka authorized service center for repair Mirka® DEXOS 1217 M AFC...
In the event of any defect, the dust extractor MUST be withdrawn from service, completely checked and repaired by an authorized service technician. At least once a year, a Mirka technician or an instructed person must perform a technical inspection including filters, air tightness and control mechanisms.
The use of non-genuine spare parts and accessories can impair the safety and/or function of the dust extractor. Only use original spare parts and accessories from Mirka. Spare parts that can affect the health and safety of the operator and/or function of the dust extractor, are specified above.
For more information regarding REACH, RoHS and our corporate social responsibility visit www.mirka.com Mirka® DEXOS 1217 M AFC...
Page 23
Poland Mirka Poland Sp. z o.o Singapore Mirka Asia Pacific Pte Ltd Spain KWH Mirka Ibérica S.A.U. Sweden Mirka Scandinavia AB Turkey Mirka Turkey Z mpara Ltd Şirketi United Kingdom Mirka (UK) Ltd United Arab Emirates Mirka Middle East FZCO USA Mirka USA Inc.
Need help?
Do you have a question about the DEXOS and is the answer not in the manual?
Questions and answers