Page 2
Contents About This Guide ························································································································· 1 Appearance ···································································································································· 2 Set Up Your Deco ························································································································ 3 Troubleshooting ··························································································································· 8 Authentication ······························································································································· 9...
Page 3
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com. • Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support.
Page 4
Appearance Each Deco has an LED that changes color according to its status, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB port, a power slot, and a Reset button. See the explanation below: Tip: The product label can be found at the bottom of the product. Pulse Yellow: Deco is resetting.
Page 5
Set Up Your Deco First let's start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup. Note: Please remain online (Wi-Fi or mobile data) throughout the app download and login steps.
Page 6
4. Plug in your Deco Plug in your Deco and wait until your Deco's LED pulses blue, then your phone/tablet will connect to the Deco automatically. Note: You can turn on Bluetooth and Wi-Fi on your phone/tablet in advance for a quicker setup.
Page 7
5. Connect your Deco 6. Specify your Deco's location Power off your modem. Connect your Deco to the modem and power it on. Select or custom a location for your Deco. The location will be used as the name of your If you don't have a modem, connect your Deco directly to the Ethernet outlet.
Page 8
7. Connect your Deco to the internet 8. Create your Wi-Fi network 9. Create your 6GHz Wi-Fi network Select the internet connection type and enter Set a network name and a password. These will Set a network name and a password. These the information.
Page 9
10. Keep your Deco up-to-date 11. Setup complete 12. Plug in other Decos (if any) Set auto update time. This allows your Your Deco network is now up. You can Place the other included Decos in a suitable position and Deco to automatically update to the connect your devices to the Deco plug them on, and they will join the network automatically.
Page 10
Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn't find Deco”? Refer to the guide https://www.tp-link.com/support/faq/2239/...
Page 11
Authentication CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400MHz—2483.5MHz (20dBm) 5150MHz—5250MHz (23dBm) 5250MHz—5350MHz (23dBm) 5470MHz—5725MHz (30dBm) 5945MHz—6425MHz (23dBm)
Page 12
UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/...
Page 13
National restrictions Attention: This device may only be used indoors in Great Britain. Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. •...
Page 14
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us. • Operating Temperature: 0°C~40°C (32°F~104°F) • 運作溫度: 0°C~40°C (32°F~104°F) • This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices.
Page 15
Symbol Explanation Dangerous voltage Caution, risk of electric shock Energy efficiency Marking Protective earth Earth Frame or chassis Functional earthing Caution, hot surface Caution Operator’s manual Stand-by “ON”/”OFF” (push-push) Fuse...
Page 16
Symbol Explanation Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
Need help?
Do you have a question about the Deco BE9300 and is the answer not in the manual?
Questions and answers