Download Print this page

OTS ET1212Pp-X-DR Series Quick Installation Manual

Industrial grade 10/100/1000base-tx poe+ to 1000base-fx ethernet media converter with redundant dc power inputs

Advertisement

Quick Links

Industrial Grade 10/100/1000Base-TX (PoE+) to 1000Base-FX Ethernet Media Converter with
Package Content
Fast Ethernet Media Converter x 1
Quick Start Guide x 1
Keep power off during installation
use Antistatic Wrist Strap correctly
Make sure using correct power supply, voltage must match
Make sure enough power supply from PSU that will not overload
Double check the wiring ( +/- ) is correct.
Keep installation dry and clean.
Do not open the chassis
Installation caution
Installation precautions
In order to avoid damage to equipment and personal injury caused by improper use, please
follow the following precautions:
a) In order to avoid damage caused by falling of the equipment, please put the equipment in
a stable environment.
Quick Installation Guide
ET1212Pp-X-DR Series
Redundant DC Power Inputs
Read Before Install
Quick Installation Guide
ET1212Pp-X-DR / version 1.0
OT Systems Ltd. | www.ot-systems.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the ET1212Pp-X-DR Series and is the answer not in the manual?

Questions and answers

Summary of Contents for OTS ET1212Pp-X-DR Series

  • Page 1 Quick Installation Guide ET1212Pp-X-DR / version 1.0 Quick Installation Guide ET1212Pp-X-DR Series Industrial Grade 10/100/1000Base-TX (PoE+) to 1000Base-FX Ethernet Media Converter with Redundant DC Power Inputs Package Content ⚫ Fast Ethernet Media Converter x 1 ⚫ Quick Start Guide x 1 Read Before Install ◎...
  • Page 2 Quick Installation Guide ET1212Pp-X-DR / version 1.0 b) When supplying power to the equipment, pay attention to confirm the range of power supply voltage, as well as the positive and negative poles of the power supply, so as not to damage the equipment by wrong operation.
  • Page 3 Quick Installation Guide ET1212Pp-X-DR / version 1.0 ⚫ Power Connection Insert the power cord into the specified position of the 6-core terminal and insert the terminal into the standard power supply inlet (P+1 and P- 1 input corresponding to the first power supply P1, and P+2 and P-2 input corresponding to the second power supply P2).