Troubleshooting - Dynex DX-P7DVD User Manual

20
Page
Preference Page

Troubleshooting

Problem
No sound or distorted sound.
Cannot fast-forward or fast-reverse
through a movie.
The icon appears on the screen.
Picture is distorted.
Remote control does not work.
Disc does not play.
Note: To access this menu, make sure that there is no disc in the disc tray.
Audio–Selects the audio language. If the language you select is not recorded on the
DVD, your player plays the default audio language.
Subtitle–Select the subtitle language. If the language you select is not recorded on the
DVD, your player displays the default subtitle language.
Disc Menu–Selects the DVD menu language. If the language you select is not recorded
on the DVD, your player displays the default language.
Parental–Blocks DVD playback based on ratings. For more information, see "Setting
parental controls" on page 18.
Default–Reset all settings except the password and parental controls back to the factory
default.
• Adjust the volume.
• Make sure that all cables are inserted correctly into the
• You cannot fast-forward through opening credits and
• Some DVDs do not allow rapid scanning or skipping of
The action you tried cannot be done because:
• The DVD software does not allow it.
• The DVD does not support the feature (for example the
• The feature is not available at the current point on the
• You entered a title or chapter number that is out of
• During fast-forwarding or fast-reversing, distortion is
• The DVD may be damaged. Try another DVD.
• Make sure that the battery is fresh.
• Make sure that nothing is blocking the IR sensor.
• Make sure that you point the remote directly at the IR
• Make sure that the disc is inserted with the label side
• Make sure that the disc is compatible with your player.
Options
Solution
appropriate jacks.
warning information at the beginning of a movie.
titles or chapters.
Subtitle feature).
DVD.
range.
normal.
sensor and that you are within 10 feet of the IR sensor.
up.
Your player can play DVDs and audio CDs.