Troubleshooting - Dynex DX-PDVD9 User Manual

Dynex products 9" portable dvd player user guide
Table of Contents

Advertisement

Available languages

Available languages

22

Troubleshooting

No sound
• Make sure that all cables are securely inserted into the correct jacks.
• Make sure you operate the TV or amplifier according to the instructions.
No image
• Make sure that the player is connected securely.
• Make sure that you operate the TV according to the instructions.
• Make sure that you set the color system according to the instructions.
Cannot advance through a movie's opening credits and warning information
• The disc is programmed to prohibit that action.
The hand icon (
• The selected feature or action cannot be completed at this time because:
• The disc software restricts it.
• The disc software does not support the feature (such as angles).
• The feature is temporarily unavailable.
• You have requested a title or chapter that is out of range.
No forward or reverse scan
• Some discs have sections that prohibit rapid scanning or title and chapter skip.
• You cannot advance through the opening credits and warning information at the
beginning of movies because the disc is programmed to prohibit that action.
Bad sound quality
• Make sure that the audio output mode is set correctly.
• Make sure that the audio connection between the player and amplifier is correct.
Disc cannot be played
• Make sure that a disc is in the player.
• Make sure that the disc is placed on the disc tray correctly, with the label side up.
• Make sure you are using the correct type of disc (digital video discs, audio CDs, or
MP3s).
• Both the player and disc are coded by region. If the region codes do not match, the disc
cannot be played. This player is coded for Region 1 discs.
Remote control does not work
• Remove obstructions between the remote control and the player.
• Point the remote control at the remote control sensor of the player.
• Replace the batteries with new ones.
Disc play starts, then stops immediately
• Both the player and disc are coded by region. If the region codes do not match, the disc
cannot be played. This player is coded for Region 1 discs.
• The disc is dirty. Clean it.
• Condensation has formed in the player. Let the player dry out, then try again.
) appears on the screen
Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-pdvd9a - widescreen portable dvd player

Table of Contents