Maintaining - Dynex DX-P7DVD User Manual

DX-P7DVD and DX-P9DVD
Problem
Play starts, then stops immediately.

Maintaining

Cleaning your player
Clean the outside of your player with a clean cloth, slightly dampened with water.
Caution: Do not use liquid cleaners or aerosol cleaners because they may damage your
Handling discs
• To keep a disc clean, do not touch the play side (non-label side) of the disc.
• Do not attach paper or tape to the disc.
• Keep the disc away from direct sunlight or heat sources.
• Store the disc in a disc case after playback.
Installing the remote control battery
To install the remote control battery:
1 Remove the battery compartment cover.
2 Insert the battery into the battery compartment. Make sure that the + and – symbols
on the battery match the + and – symbols in the battery compartment.
3 Replace the battery compartment cover.
• Make sure that the region code for a DVD matches the
• Make sure that the disc is not dirty.
• If condensation has formed inside your player, let your
player.
Solution
region code for your player. Your player's region code is
1. The DVD's region code is on the DVD or the DVD
packaging.
player dry out.
21