Dell PowerEdge 1550 Self-Study Manual page 41

FRU
Long Card Bracket
Fan Bracket
System Fan
2-Post Rack Mounting Kit
4-Post Rack Mounting Kit
Memory
Monitors
Network Controllers
202 W Non - Redundant Power Supply
Control Panel printed wiring assembly
Riser Card
System board
Pentium III Processor
Heat Sink
Heat Sink Clip
Version 0.3, 4 December, 2000
Dell
Description
Bracket mounted at front for securing
full length PCI cards in the system.
Long plastic bracket at the front of the
system that holds the system fans.
Active cooling device located in the
front of the system housed in the fan
bracket. The system contains four.
Rail kit for mounting the system into a
two-post rack.
Rail kit for mounting the system into a
four-post rack.
Temporary storage modules.
Standard video output device connected
to the VGA port of the computer.
Add-in network adapter.
Single power supply that does not afford
fault-tolerant power to the system.
Control panel board that conveys signals
from the control panel cable to the
switch. It provides information about
the system via LEDs and also provides
Keyboard, video, and mouse access
through the front of the system.
Printed wiring assembly that adapts
vertical PCI slots to an horizontal
orientation.
ATX form factor system board.
Standard Intel Xeon "Coppermine"
processor.
Passive cooling extension for the
processor.
Clip that secures the heat sink to the
processor by clipping to the processor
socket.
DCSE: PowerEdge 1550 Self-Study
Page 35