Subscribe to Our Youtube Channel
Related Manuals for Caple CE930
Summary of Contents for Caple CE930
- Page 1 C e i l i n g H o o d I n s t r u c t i o n M a n u a l CE 9 3 0 Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk...
-
Page 2: Table Of Contents
C O N T E N T S Warnings Environmental Protection Opening The Panel Installation Remote Control Lighting Timing Cleaning and Maintenance Caple Contact Details Instruction manual CE930 Please keep this instruction manual for future reference... -
Page 3: Warnings
(eg. centralized heating, radiators, water heaters, etc.). To evacuate the air outlet, please comply with the pertaining rules given by competent authorities. Instruction manual CE930 Please keep this instruction manual for future reference... - Page 4 - Before carrying out any cleaning or maintaining operations, the appliance needs to be removed from the electric grid. Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 5 - It must only be used as a domestic appliance to extract vapours and remove odours from cooking. Any other usage is not supported by the manufacturer and could be dangerous. Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 6 - The cooker hood can get very hot during cooking due to heat rising from the hob. - Do not touch the housing or the grease filters until the cooker hood has cooled down. Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 7 › Staff kitchen areas in shops, offices and other working environments. › Farm Houses. › By clients in hotels, motels and other residential type environments. › Bed and breakfast type environments. Instruction manual CE930 Please keep this instruction manual for future reference...
-
Page 8: Environmental Protection
Registration can also be completed online by visiting www.caple.co.uk. Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase. If you fail to show your warranty card you will incur all repair charges. - Page 9 Radio Equipment Directive (RED) 2014/53/EU. This Declaration is issued under the sole responsibility of the manufacturer. Hereby, Caple declares that the radio equipment included in the product is in compliance with the RED directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on our website www.caple.co.uk.
-
Page 10: Opening The Panel
F I G . 1 A F I G . 1 B F I G . 1 C F I G . 1 D F I G . 1 E 10 Instruction manual CE930 Please keep this instruction manual for future reference... -
Page 11: Installation
The extractor is supplied 1 x painted steel panel (Fig.2) and 1 x support for a plaster board panel (Fig.3). Depending on your chosen installation, select either panel to proceed with. N OT E : Plasterboard is not supplied with the product. Instruction manual CE930 Please keep this instruction manual for future reference... - Page 12 .3. The ceiling brackets are telescopic, so their height can be adj usted at 80mm between the ing and the hood. F I G . 4 12 Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 13 'Opening the plasterboard panel to the hood, see Panel' section. Panel' section. Panel' section. ‘Opening the Panel’ section. F I G . 7 Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 14 Use an 8mm helical bit to make four holes in the solid ceiling, following the dimensions dimensions in Fig.9. in Fig.9. Fig.4. Fig.18. FIG.9 F I G . 9 14 Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 15 It is possible to choose the side of the hood on which to let the ducted air flow (Fig.11 and Fig.12). (Fig.11 and Fig.12). (Fig.11 and Fig.12). (Fig.11 and Fig.12). FIG.11 FIG.12 F I G . 1 1 F I G . 1 2 Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 16 Reposition the grease filters and fit the cover panel as explained in thr 'Opening the Reposition the grease filters and fit the cover panel as explained in the Panel' section. ‘Opening the Panel’ section. 16 Instruction manual CE930 Please keep this instruction manual for future reference...
-
Page 17: Remote Control
R E M O T E C O N T R O L Remote control used for the remote operation of Caple hoods: T E C H N I C A L DATA Alkaline battery powered: 12V mod. 27A Operating frequency: 433.92 Mhz... - Page 18 Press the main power-off button on the hood and then restore power to the electronic control unit. Within the next 15 seconds, press the Light Button to synchronise the central unit with the code. 18 Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 19 2 seconds. When LED’s light on, press buttons (within 5 seconds). LED’s flashing 6 times indicate the procedure is completed. WA R N I N G : This operation permanently deletes the preset codes. Instruction manual CE930 Please keep this instruction manual for future reference...
- Page 20 The products are endowed with an electronic device which automatically switches the product off after 4 hours working from the last operation. 20 Instruction manual CE930 Please keep this instruction manual for future reference...
-
Page 21: Lighting
As long as the key is continuously pressed, the colour temperature is changed from warm to cold. Stop pressing the Light key to select the desired colour. Exit the colour temperature selection function by pressing the ON/OFF key. Instruction manual CE930 Please keep this instruction manual for future reference... -
Page 22: Timing
› If the appliance is working at 3rd speed, it is automatically switched to 2nd speed, after 7 minutes operation. Operation speeds can also be changed during operation. The energy consumption of the appliance in standby mode is lower than 0.5W. 22 Instruction manual CE930 Please keep this instruction manual for future reference... -
Page 23: Cleaning And Maintenance
› To clean the appliance itself, tepid water and neutral detergent are recommended (for the painted steel panel only), while abrasive products should be avoided. › The LED lights must be replaced only by a qualified person. Instruction manual CE930 Please keep this instruction manual for future reference... - Page 24 Unplug the unit from the power supply before starting the process. 1. Carefully remove the 2 screws that secure the light. information, please contact Caple service - 0117 938 7420 or service@caple.co.uk Unplug the unit from the power supply before starting the process.
- Page 25 N OT E S : Instruction manual CE930 Please keep this instruction manual for future reference...
-
Page 26: Caple Contact Details
Caple Service Fourth Way Avonmouth T: 0117 938 1900 Bristol E: service@caple.co.uk BS11 8DW www.caple.co.uk...
Need help?
Do you have a question about the CE930 and is the answer not in the manual?
Questions and answers