Dell 1700/1700n Owner's Manual page 19

NOTE: Memory options designed for other printers may not work with your printer.
Unpack the memory card.
5
NOTICE: Memory cards are easily damaged by static electricity. Touch something metal, such
as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
Align the notches on the bottom of the card with the notches on the connector.
6
Push the memory card firmly into the connector until the latches on either end of the
7
connector snap into place.
It may require some force to fully seat the card.
Make sure each latch fits over the notch on each end of the card.
8
Close the side cover.
9
Close the rear exit.
10
Close the front cover.
11
Pre p a ri n g t he Pri nte r
19