Levana Mila Manual

Getting to Know your Product

STRANGULATION HAZARD: Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3ft. (0.9 m) away).

Monitor Buttons and Functions

Camera Buttons & Functions

Notification Bar

1. Signal Strength
2. Voice Activated Power Save Mode
3. Monitor Mode: Audio Only
4. Monitor Mode: Always On
5. Temperature Alert (if activated)
6. Lullaby Playing
7. Monitor Audio Muted
8. Sound Indicator (at active camera)
9. Temperature (at active camera)
10. Time
11. Battery Level

TIP: This icon represents the Lullaby duration you have set. The dots located beside the camera icon indicate which paired camera you are viewing.

Setting Up Your Device

Charge the Monitor for 7 hours and Plug in the Camera

TIP: Ensure the camera's temperature sensor is unobstructed. When the camera is placed near a window or air vent, the accuracy of the temperature rating may be affected.

We recommend placing your camera(s) no more than 5ft. away from your baby, as audio may not be detected if placed further. For a safe setup, never mount cameras directly above the crib or baby. Power cords must be kept at least 3ft. away from the crib and baby's reach at all times.

Using Your Device

Viewing Modes

Navigate to the Menu and select Viewing Modes. Please note that Multi-Camera Views require two or more paired cameras.

TIP: Press and hold the button to switch cameras when there are two or more cameras paired to your monitor.

Full Screen View
This mode allows you to see one camera in full-screen view.

Multi-Camera Views
Split and Quad Screen allows you to see up to four cameras at once.

The camera with an orange border is the Active camera. This means the audio, pan & tilt functions, and Talk to Baby are active for this camera only.

Sequence Mode
When there are two or more paired cameras, your monitor can cycle through each camera on full screen every 5 seconds.

Monitor Modes

Navigate to the Menu and select Monitor Mode. Each option will change how your audio and cameras are displayed on the monitor.

Always On
This mode keeps your display and audio ON, unless you press the Sleep/Wake button.
TIP: When you press the orange Sleep/Wake button, Mila will not display any video or play any audio.

Audio Only
This mode turns OFF your display and keeps audio playback from your cameras ON. If you have multiple cameras paired, you'll only hear audio for the Active camera. In Sequence Mode, audio will cycle through all paired cameras every 5 seconds.

Voice Activated
This mode puts your video display to sleep and wakes your monitor for 20 seconds when noise is detected at the camera. If two or more cameras are paired, your monitor will wake up to the specific camera that detects noise.
The sensitivity of the camera can be adjusted. Low: If you only want to hear loud screaming or crying, Medium: If you want to hear babbling and talking, or High: If you want to hear everything from low whispers to crying.

Lullabies

Navigate to the Menu, select Lullabies, and select the camera you want to play Lullabies or White Noise from. Each camera can play a different lullaby.

Lullaby
Choose between three classic lullabies, soothing nature sounds or white noise.

Sound Activation
When turned ON, your selected lullaby will play for five minutes when Mila detects noise from your baby.

Duration
Select ON to play a lullaby continuously or choose a preset duration. Duration does not need to be turned ON for Sound Activation to be active.

Camera Volume
Adjust the volume output from the selected camera.
This will apply to the Lullabies and Talk-to-Baby volume.

TIP: While using Lullabies in the Voice Activated Monitor Mode, the microphone is muted and will not activate for noise in the room. We recommend using Always On or Audio Only while playing Lullabies from the camera.

Pairing Additional Cameras

Your initial Mila Baby Monitor will come to you with the camera(s) paired. Follow these steps if adding additional cameras.

Press the Menu Button to access the Device Menu.

Select Settings.

Select Camera Pairing.

Select a camera square with a (+) icon to pair a new camera. with

Press and hold the Pair Button on the bottom of the camera until a beep is heard.

Pairing successful!

TIP: Camera must be plugged-in to pair with Mila's monitor.

Frequently Asked Questions

How can I change which camera I am viewing

Press and hold the button to switch your Active camera. When doing this in Split or Quad Screen View, the Active camera will have an orange border.
TIP: Audio playback, Talk to Baby, and pan & tilt functions will only affect the Active camera.

Why can't I hear audio from one of my cameras while in Split Screen Monitor Mode?
While in Split or Quad Screen and Always On Monitor Mode, Mila will only play audio from the Active camera.
Note: The Active camera will have an orange border. If you need to detect audio from all cameras, we recommend using Sequence Mode. This will cycle through each camera in Full-Screen every 5 seconds.

Why is the temperature on my monitor different from the thermostat in my home?
Mila's thermostat is located on the camera (See Camera Buttons & Functions page). If your camera is placed near a window or air vent, the accuracy of the temperature rating my be affected. When moving the camera, it may take some time for Mila's thermostat to adjust to the temperature of the new location.

Why can't I hear my baby through the monitor when they're making noise?
Sometimes Mila's camera is too far away from your baby to detect the sounds being made. We recommend placing your camera within 3-5ft. from your little one for the best audio performance. While using Lullabies in Voice Activation Monitor Mode, the microphone on that camera is muted. This means you will not be notified if additional noise is detected. If playing Lullabies/White Noise from Mila's camera, we recommend using Always On or Audio Only.

How can I make my unit battery last longer

The less time your screen is turned on, the more battery life you will be able to preserve. We recommend using Voice Activation when possible so that you're only being notified when your little one makes a sound. There are options for setting the sensitivity of your Voice Activation. Using the Low Sensitivity will reduce the number of times Mila wakes up, only notifying you when noises such as crying or screaming are detected. Mila also features an Audio Only mode if you wish to have constant audio, but do not need to see your little one.

My video stream has gone black

How can I fix it?
Though rare, it is possible that other wireless devices in your home may interfere with Mila. If this happens, just press and hold the Menu button for 10 seconds and your video should resume.

Need More Help?
Our mission is to bring you the peace of mind you deserve during your parenting journey. If your experience with your monitor is anything short of amazing, we're here to fix that!
Open camera & scan this QR code to access all of our Mila support articles & tips or visit: mylevana.com/support

Open camera & scan the QR code below to access all Mila support videos or visit: bit.ly/MilaSupport

mylevana.com
/mylevana
@mylevana

Documents / Resources

References

• Mila™ 5" 720p High Definition Video Baby Monitor - YouTube
• Levana

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Levana Mila Manual