Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for AV Stumpfl varioclip BCC-RW447/R10
Summary of Contents for AV Stumpfl varioclip BCC-RW447/R10
- Page 1 VARIOCLIP MANUAL...
- Page 2 CENTRE SUPPORT Consists of plug in elements with interlocking and safety bolts. Adaptable to any frame size. FOLDABLE LEGS Standard delivery AT32/64. According to the size of the projection screen five different leg types are available. WING SCREWS Yellow bag for wing screws and leg connectors. PROJECTION SCREEN BAG Lined storage bag for projection screen...
- Page 3 SOFTBAG WITH WHEELS padded , tearproof nylonbag with wheels and carrying straps small 128x25x30 cm big 133x31x35 cm FRAME VARIOCLIP Modular plug-in frame system Basic frame (4 corners 210x210 cm or 210x160 cm) folded, standard and supplementary frame components Hardened aluminum alloy guarantees highest stability at lowest product weight.
- Page 4 GENERAL QUALITY AND SAFETY: This projection screen is in accordance with the safety regulations in DIN standard 19045. The screen fabric is comply with DIN 4102 part 1 and the specifi cations of the according data sheet. WARRANTY: The warranty period for production defi ciencies is 5 years for the frame elements and 24 months for the projection surface.
-
Page 5: Frame Set Up
VARIOCLIP FRAME COMPONENTS FRAME SET UP All components of the mobile projection screen are labled. For assembly, start with the basic frame. Unfold the corner elements 1 to 4. Do not engage the shear joints now and lay out the components according to their labeling. The standard elements 5 (110cm) and supplementary frame components 6 (below 110cm) have to be inserted according to their labeling (see sketch above). -
Page 6: Connection Types
CONNECTION TYPES Depending on the application and screen size three different connection types are available for VARIOCLIP. VARIOCLIP The quick and easy plug-in connection for small to medium sizes when installed with legs. VARIOCLIP LOCK The plug-in connection with additional locking for larger screens and/or “flying- screen“ mounting. A simple 90 °... - Page 7 FRAME SET UP Engaging the shear joints ensures the maximum screen stability. CENTRE SUPPORT AND HORIZONTAL STRUT The center support consists of a profile „centre support bottom“ 7 and a profile „centre support top“ 8 and according to the screen size, and additionally of parts “standard component - centre support“ 9 (110cm) and a “supplementary component-centre support“...
- Page 8 FOLDABLE LEGS FOR VERTICAL ADJUSTMENT The legs are foldable for compact transport volume. All profile elements are connected with snap joints or hinges inseparable. MOUNTING 1 First open the vertical elements of the legs (with holes) 2-3 The snap joints engage automatically. 4 To secure the legs by a single person, we recommend the use of set up supports.
-
Page 9: Leg Types
LEG TYPES T 32 AT 32 AT 32/64 AT 48 AT 64 220 cm 320 cm 430 cm 415 cm 550 cm min: 6cm min: 6cm min: 9cm min: 9cm min: 9cm max: 82cm max: 113cm max: 146cm max: 161cm max: 176cm ! Please mind the maximum set-up height of the legs: min: minimum height of the bottom edge of the frame... - Page 10 PROJECTION SURFACE In projection system VARIOCLIP the projection surface is equiped with the patented QUICKCLIP instead of snap fasteners. (see picture right). SURFACE MOUNTING 1 Lay out the surface on the frame with the label „OBEN-TOP“ corresponding with the upper frame bar. 2-3 Hook the fi rst QUICKCLIP into the slot of the corner plug and additionally a view QUICKCLIP along...
- Page 11 SET UP 1 Lift the projection screen with one person each on the top corners and put it up by supporting the screen along the vertical frame elements. To avoid mechanical overload and damage of screen elements and legs with large screens or high set-up height, the screen has to be raised with an appropriate number of persons or rather by using hoisting devices.
- Page 12 BREAK DOWN Open the shear joints and leg supports with one person each on the foldable legs. Bring down the screen by supporting the screen along the legs and vertical frame elements towards the top corner edges. BREAK DOWN NOTE 1 To detach the projection surface you have to remove the QUICKCLIP on one vertical and one horizontal frame side only.
- Page 13 ACCESSORIES ANTI-SWAY BRACE To increase the side-stability of the projection screen the in length variable Anti-Sway Brace has to be screwed on the leg and clamped to the basic frame. DRAPEKIT To drape a projection screen with decoration curtains. Depending on requirements, various frame parts can be used to attach the drapes Valance Bar (top drape), Wing Bar (left and right drape) and Skirt Bar (bottom drape - height...
-
Page 14: Flight Case
SET UP SUPPORT The optional available, set up support allows an easy mounting of the legs. By means of the 4 round bar holders the wings screws can be bolted by one person only without holding the frame and leg in position. FLIGHT CASE As an option we offer sturdy, stackable transport cases with rollers for all mobile projection screens.
Need help?
Do you have a question about the varioclip BCC-RW447/R10 and is the answer not in the manual?
Questions and answers