Table of Contents
Advertisement
Cyclonic vac VC71050M Rev 2
Cleaning the exhaust
filter
The exhaust filter ‰ is located at the side
of the cleaner. To remove, push the catch
and pull the cover away. G Take out the filter.
Wash regularly in warm water, but do not use
detergent. Allow to dry naturally and ensure it
is totally dry before replacing it.
IMPORTANT
• All filters should be checked regularly for
signs of damage, preferably after each
cleaning task. The filters must be replaced
immediately if they become damaged.
• Always disconnect the cleaner from the
mains when checking filters.
• Always make sure all filters are fitted
before use. Failure to do so may result in
damage to your product.
19/6/03
5.02 PM
Page 7
Storage position
When finished you can store the tubes
and accessories by locating the tube storage
clip into the slot on the side of the cleaner as
shown H.
G
6
H
Advertisement
Table of Contents
