Onboard Devices - Dell Precision YT583 User Manual

Diskette
Drive
(Internal
default)
SATA 0
through 2
(On default)
SATA
Operation
(AHCI
default)
SMART
Reporting
(Off
default)

Onboard Devices

Integrated
NIC
(On default)
Integrated
Audio
(On default)
1394
Controller
Enables and disables the floppy drives and sets read
permission for the internal floppy drive. Off disables all
floppy drives. USB disables the internal diskette drive and
enables a USB floppy drive, if the USB controller is enabled
and a USB drive is connected. Internal enables the internal
floppy drive. Read Only enables the internal drive controller
and allows the internal floppy drive read-only permission.
NOTE:
Operating systems with USB support will recognize USB
floppy drives regardless of this setting.
Enables (On) or disables (Off) a SATA drive.
Displays the Controller type (SATA), Port number the drive
is using, Drive ID number, and Capacity.
Determines the integrated SATA controller's operating mode,
which can be either AHCI or ATA.
Controls whether errors for integrated drives are reported
during startup.
Enables or disables the integrated NIC controller. Settings are
On, Off, On w/RPL, or On w/ PXE. When the On w/ PXE or
the On w/RPL setting is active, if a boot routine is not available
from the network server, the computer attempts to boot from the
next device in the boot sequence list.
On
Enables ( ) or disables (
audio controller. You can also select Auto
to use the add-in Audio controller.
Enables (On) or disables (Off) a 1394 controller.
Off
) the onboard
System Setup
77