Removing A Drive-Panel Insert - Dell Precision YT583 User Manual

4
1 sliding-plate lever
3 drive panel
4 Pivot the drive panel outward and lift it from its side hinges.
5 Set the drive panel aside in a secure location.

Removing a Drive-Panel Insert

NOTICE:
Drive-panel inserts may contain screws on the inside. You can attach the
screws to new drives that do not have any screws.
1 Remove the drive panel (see "Removing the Drive Panel" on page 246).
NOTICE:
To avoid breaking the drive-panel insert tab, do not pull the insert more
than approximately 1 cm (½ inch) away from the drive panel before sliding the tab
out of the slot.
1
3
2
2 sliding-plate
4 drive-panel tabs
Adding and Replacing Parts
247