Removing An Expansion Card - Dell Precision YT583 User Manual

18 If you installed a network adapter card and want to disable the integrated
network adapter:
Enter system setup, select Integrated NIC, and then change the
a
setting to Off.
Connect the network cable to the network adapter cards connectors.
b
Do not connect the network cable to the network connector on the
back panel.
19 Install any drivers required for the card as described in the card
documentation.

Removing an Expansion Card

1 Follow the procedures in "Before You Begin" on page 139.
CAUTION:
lbs) and can be difficult to maneuver. Seek assistance before attempting to lift,
move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid
injury; avoid bending over while lifting. See your
other important safety information.
CAUTION:
maximum system stability. Failure to install the stand could result in the computer
tipping over, potentially resulting in bodily injury or damage to the computer.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 141).
202
Adding and Replacing Parts
Your computer is heavy (it has an approximate minimum weight of 55
The computer stand should be installed at all times to ensure
Product Information Guide
for