Carrier TSTATCCEWF-01 Quick Start Manual

1
CONNECT to Wi-Fi
BEFORE YOU START:
Download and install the
Carrier Home app from
Google Play or the App Store
on your smart device.
TO CONNECT YOUR SMART THERMOSTAT TO YOUR WI-FI:
A. Open the Carrier Home app on your smart device. If this is your first time using the app, create an account, then follow
the prompts to add your home location.
B. When prompted to add a device,
select Smart Thermostat, then
hit the Add selected device
button.
CONNECTED COMFORT
IS JUST THREE STEPS AWAY
To extend your Carrier Smart Thermostat's two-year limited warranty
to a full five years of limited warranty protection, you are required to:
Connect your thermostat to your Wi-Fi® network
4
Accept the terms and conditions to allow your dealer to view
4
your system status information
Register your thermostat at productregistration.Carrier.com
4
SCAN the
QR Code
Find the mobile onboarding QR code
on the hang tag on the front of your
thermostat, back of your themostat or
the front cover of the installation manual.
LET'S CONNECT
(IN 3 EASY STEPS)
C
LEAVE ATTACHED FOR HOMEOWNER
M
CONTRACTORS
Y 1. Open the Carrier Service
Technician app
CM
2. Select Connect to Equipment
and then Smart Thermostat
MY
3. Follow the guided thermostat
CY
configuration instructions
CMY
HOMEOWNERS
1. Download the Carrier Home app
K
and create an account
2. Select Add Device and then
TSTATCCEWF-01
Smart Thermostat
Carrier Smart
3. Follow the guided
Thermostat
setup instructions
to connect to your
Installation Instructions
Wi-Fi network
Designed in the USA.
NOTE: Read the entire instruction manual
before starting the installation.
Mobile
Onboarding Model: TSTATXXXXX-01
S/N: XXXXXXXXXXXX
WARNING: Contains strong magnets; can
P/N: J1TH024XXX-XXXXX
XXXXXXX be harmful to pacemaker wearers. Magnets are
permanently installed; swallowing risk if removed.
FCC ID: MG3-J1TH024
IC: 2574A-J1TH024
Made in Vietnam
Designed in USA
TSTATCCEWF-01 Manual.indd 1 TSTATCCEWF-01 Manual.indd 1 3/26/24 2:23 PM 3/26/24 2:23 PM
Room Thermostat
Smart Home E525198
24Vac Class 2
Pat. https://www.corporate.carrier.com/patents/
C. Read the setup requirements
screens, then establish
a Bluetooth® connection
between your smart device
and the thermostat, using
the QR code. Select
QR code and scan your
thermostat's QR code.
NOTE:
If you can't find your
QR code, simply tap
the I don't have a QR
Code link to continue.
2.4 GHz
Make sure your Wi-Fi has a
dedicated 2.4 GHz network
with a unique name.
Scan