BACk viEW (FiG 2)
1
2
3
4
. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
3. EU / Uk: Select the nearest radio signal (RMS600
only)
4. Battery compartment
REMOTE SENSOR (FiG 3)
1
. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET: Reset unit to default settings
5. CHANNEL switch
GETTiNG STARTED
REMOTE SENSOR SET UP
The remote sensor can collect data from up to 3 channels.
To set up the remote sensor:
. Slide open the battery door.
2. Slide channel switch to select a channel (, 2, 3).
Ensure you use a different channel for each sensor.
3
2
4
3
5