Citizen FS00 Instruction Manual
Hide thumbs
Also See for FS00:
- Instruction manual (3 pages) ,
- Instruction manual (9 pages) ,
- Instructions manual (9 pages)
Advertisement
Quick Links
FS00 FS10 FS20
Size
<ligne>
Height
<mm>
Accuracy
<per Month>
Battery
Life
Battery consumption could be minimum by pulling out the stem
Balance
Weight
<μN.m>
Clearance
Original
Package
Time measurement
Accuracy
The unit (gate) time of measurement must be set at "10 sec."
and the measurement must be performed in the form of complete watch.
10 sec
FS20
10 ½'''
5.10(FS00 4.13)
±20
2
years
*60 minutes chronograph operation per day
Minute
Second
Small
Featured by Shock Detection
0.45mm min.
Hand
Movement
0.20 – 0.45mm.
500
10 sec
10 sec
Push "A"
Start and Stop the chronograph
Push "B"
Reset the chronograph
sec
0.40
0.08
0.02
case
pcs
Setting the Time
Set CHRONOGRAPH hands to reset
Push A to reset the hands position to the ZERO position,
And continue to push A to put them forward
Setting the Date
DO NOT set Date between
9:00pm – 1:00am
Pusher
065-549
Attached
Stem
Φ23.7
SR626SW
7
Date
Center
Chronograph
Chronograph
Small Second
FS00
60
24
FS20
24
60
Parallel Push Button Ver.
60
24
24 Hour
Minute
FS10
24
7
60
High Hand Ver.
FS03
FS13
FS23
FS61
FS81
Advertisement
Related Manuals for Citizen FS00
Summary of Contents for Citizen FS00
- Page 1 FS00 FS10 FS20 Size 10 ½’’’ Pusher <ligne> 065-549 Attached Stem Height 5.10(FS00 4.13) <mm> Φ23.7 SR626SW ±20 Accuracy <per Month> Battery Life years *60 minutes chronograph operation per day Battery consumption could be minimum by pulling out the stem...
-
Page 7: Displays And Buttons
Cal. FS00/FS01/FS03 Instruction manual CHRONOGRAPH FUNCTION: : CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing up to 59 minutes 59 seconds. A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) -
Page 8: Setting The Date
C) SETTING THE DATE 1. Pull the crown out to the 1st position. 2. Turn the crown clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3. - Page 9 E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 2nd position. 2.
Need help?
Do you have a question about the FS00 and is the answer not in the manual?
Questions and answers