Citizen FS10 Instruction Manual

Hide thumbs Also See for FS10:

CHRONOGRAPH FUNCTION: : CENTER SECOND HAND CHRONOGRAPH 1/1 sec.

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE CHRONOGRAPH

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

A) DISPLAYS AND BUTTONS

Hour hand

Chronograph

minute hand

Second hand

B) SETTING THE TIME

In the case the crown is of the screw-lock type.loosen the screw by turning the crown to the

left before operating crown,and after having returned the crown to the normal position

following operation,turn the crown to the right while push-ing it in to securely retighten it.

Cal. FS10/FS11/FS13 Instruction manual

Timing up to 59 minutes 59 seconds.

Chronograph

second hand

Button A

24 hour hand

Minute hand

Crown

Button B

Date

1/4

Table of Contents

Need help?

Do you have a question about the FS10 and is the answer not in the manual?

Page 1 Cal. FS10/FS11/FS13 Instruction manual CHRONOGRAPH FUNCTION: : CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing up to 59 minutes 59 seconds. A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
Page 2 C) SETTING THE DATE 1. Pull the Crown out to the time correction position when the second hand has reached the O seconds position. 2.Turn the crown to set the time. *The 24 hour hand moves in conjunction with the hour hand. pay attention to AM and PM when setting the time.
Page 3 1. pull the crown out to the date correction position. 2.Turn the crown to the right to set the date. * The crown turns freely and the date does not change if the crown is turned to The left. *If the date is set while the time on the watch is between the hours of about 9:00PM and 1:00AM, the date may not change on the followind day/ If this happens,set the date after temporarily moving the hands to a time other than between the above times.
Page 4 [Chronograph Hand Zero Positioning] 1. pull the crown out to the time correction position. 2.press button (A) to position the chronograph second at the 0 position. *The chronograph second hand can be advanced rapidly by depressing button (A) continuously. 3.Once the chronograph second hand has been positioned at the O position, reset the time and return the crown to the normal position.

Fs11Fs13