HIKVISION DS-K1T670 Series User Manual page 106

DS-K1T670 Series Face Recognition Termianl User Manual
Click Save to save the settings after the configuration.
Terminal/Terminal Type/Terminal Model
Select terminal and get the terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Continuous Face Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Tampering Detection
Enable the anti-tamper detection for the card reader.
Card No. Reversing
The read card No. will be in reverse sequence after enabling the function.
Figure 9-5 Set Authentication Parameters
92