Advertisement
Quick Links
Advertisement
Related Manuals for Waferlock L700N
Summary of Contents for Waferlock L700N
- Page 1 Security Simplicity Smart Lock User Manual L700N- L701N...
- Page 2 L700N-L701N Smart Lock User Manual...
- Page 3 All components are covered for one (1) year after the date of purchase or installation from supplier. The user is required to provide dated proof of purchase. Waferlock or its authorized distributor will determine if there is a warrantable condition associated with material and/or manufacturing workmanship.
-
Page 4: Main Feature
Main Feature • 4 in 1: Opening the door by pin code, user card / tag, mobile phone, and mechanical key • UID with Mifare Classic / DESFire and ISO 14443A card • Low battery with acoustic warning sound • Number of users: ... - Page 5 Change Master Pin Code (Default is 123456) Step 1 Press any button to activate the keypad, then press 0 # to set up the Master Pin Code. Step 2 Enter Default Master Pin Code 123456, then press #. Default Master Pin Code is 123456.
- Page 6 • Once the lock turns to App Mode, ALL the existing user access settings (Key Card, Passcode ...) will be deleted. DON’T WANT TO USE THE APP? Please go to page P05-12 for manual programming instructions for Standalone Mode. Questions about your new lock? Let us help you! support@waferlock.com...
- Page 7 STANDALONE MODE PROGRAMMING INSTRUCTION WARNING Standalone Mode programming functions Please remember to change (Master Pin Code) are NOT available after the lock Master Pin Code (Default is 123456), is paired with mobile App! referring to the instruction on P03. If you would like to use Standalone Mode, please unpair the lock via WAFERKEY App.
- Page 8 Program New Pin Code Step 1 Press any button to activate the keypad, then press 1 #. If the lock has been programmed with 250 users already, 2 beeps followed by red light ashing 2 times, then standby. Step 2 Enter Master Pin Code , then press #.
- Page 9 Delete Individual User (Cards / Tags / Pin Codes) Step 1 Press any button to activate the keypad, then press 2 #. Step 2 Enter current Master Pin Code, then press #. Correct Master Pin Code: 1 beep followed by green light ashing 1 time.
- Page 10 Delete All User (Cards / Tags / Pin Codes) Reset the lock to default Step 1 Press any button to activate the keypad, then press 3 #. Step 2 Enter current Master Pin Code, then press #. Correct Master Pin Code: 1 beep followed by green light ashing 1 time.
- Page 11 Set Up The Lock As Toggle Mode Step 1 Step 2 Press any button to activate the keypad, Enter current Master Pin Code, then press #. then press 4 #. Correct Master Pin Code: 1 beep followed by green light ashing 1 time. Incorrect Master Pin Code: 2 beeps followed by red light ashing 2 times, then standby.
- Page 12 Set Up The Lock As Dual Mode Step 1 Step 2 Press any button to activate the keypad, Enter current Master Pin Code, then press #. then press 6 #. Correct Master Pin Code: 1 beep followed by green light ashing 1 time. Incorrect Master Pin Code: 2 beeps followed by red light ashing 2 times, then standby.
- Page 13 Combination Of Lock Modes Standard Toggle This is a default setting. When the When lock is in Toggle + Single lock is in Standard + Single mode, mode, the lock will switch between once unlocking the door, it will be “always open”...
- Page 14 Open Door With User Card Step 1 Step 2 Approach the reader by a user card. The Led light up. If the card is valid (Programmed), 1 beep followed by green light ashing 1 time. If the card is invalid (Not programmed), 2 beeps followed by red light ashing 2 times, then standby.
-
Page 15: Low Power Warning
Low Power Warning Step 1 When using user cards to unlock, lock the door, or programming card to program. When using pin codes to unlock or lock the door. Step 2 If the lock battery is low, there is an acoustic warning for the user with 3 short beeps 5 times, followed by orange light ashing.
Need help?
Do you have a question about the L700N and is the answer not in the manual?
Questions and answers