Waferlock C-700 Series User Manual

C-700 Series C-700 Series
Digital Locking Digital Locking
Cylinder Cylinder
User Manual User Manual
www.waf e rlock.com www.waf e rlock.com
Parts list for the C700 Cylinder Parts list for the C700 Cylinder
■ Digital Locking Cylinder X 1 ■ Digital Locking Cylinder X 1
External Knob Dimensions: 47 (L) x 35.8 (D)mm External Knob Dimensions: 47 (L) x 35.8 (D)mm
■ Internal Knob x 1 ■ Internal Knob x 1
(Dimensions: 25 (L) x 32 (D)mm ) (Dimensions: 25 (L) x 32 (D)mm )
■ Batteries X 1 ■ Batteries X 1
( CR2 ) ( CR2 )
■ M5 Screw x 1 ■ M5 Screw x 1
■ L shape 1.5mm Hex Screw Driver ■ L shape 1.5mm Hex Screw Driver
■ C7 Tool ( optional ) ■ C7 Tool ( optional )
Waferlock Screw Driver for C700 Cylinder use Waferlock Screw Driver for C700 Cylinder use
Battery Replacement Battery Replacement
white strap white strap
1 1
Use the C7 screw driver to find and match Use the C7 screw driver to find and match
2 holes of external knob. 2 holes of external knob.
( There are 4 holes alongside of external ( There are 4 holes alongside of external
knob ) knob )
2 2
One hand holds the knob cover and the One hand holds the knob cover and the
other hand turns the tool counter-clockwise other hand turns the tool counter-clockwise
until the knob ring is loosed from the knob, until the knob ring is loosed from the knob,
then pull out the metal cover. then pull out the metal cover.
3 3
Insert CR2 x 1 battery into the knob and Insert CR2 x 1 battery into the knob and
make sure that the white strap is properly make sure that the white strap is properly
under/cross the battery. ( The strap will under/cross the battery. ( The strap will
help you to pull ou the battery easily ) help you to pull ou the battery easily )
4 4
Place the metal cover back to the knob by Place the metal cover back to the knob by
matching the cover hint hole with knob matching the cover hint hole with knob
raised edge properly. raised edge properly.
5 5
Turn the knob ring clockwise with the C7 Turn the knob ring clockwise with the C7
tool to tighten the knob ring back insdie tool to tighten the knob ring back insdie
the knob properly. the knob properly.