Alarms; Low Temperature; High Temperature - Johnson Controls SABROE WHC 2.1 Installation And Operating Manual

6. Alarms

Low flow
• The electric plug LED at the flow switch (Fig. 2 , pos. 4) will be on.
• The heating element will be disconnected.
• The compressor will stop (if the WHC control box is connected to the compressor
controller).
Note: The WHC control panel will NOT indicate alarm for low flow.

Low temperature

The WHC control panel will show the alarm E05 (default 35°C).

High temperature

The WHC control panel will show the alarm E05 (default 85°C).
Installation and operating manual - Sabroe WHC circulation system
14/17
Alarms
011162 en 2021.05