JLG 450AJ Operating Instructions

JLG 450AJ BUCKET LIFT OPERATING INSTRUCTIONS &
Quick Start Guide
The ground control station and platform control station emergency stop buttons
(RED) must be set to "ON" in order to operate this machine. The unlock toggle
must be held down in order to operate any controls.
1.
Starting unit from Ground Control
- From Ground Control -Turn key of platform/ground selector switch to
GROUND. Push the Engine START switch until engine starts.
- From Platform Control – Turn key of platform/ground selector switch
to PLATFORM. Make sure red emergency stop switch is pulled out.
Push the engine START switch until unit starts. ENGINE WILL NOT
START WITH FOOT PEDAL PRESSED DOWN.
2. Travelling Forward and Reverse – At platform controls, pull the emergency
switch out and start the engine. Position the drive controller to forward or
reverse as desired. Press the foot pedal down and lift the safety ring on the
joystick while pushing it forward or backward.
3. Travelling Left and Right – Press the foot pedal down and lift the safety ring
on the joystick. At the top of the joystick there is a rocker switch. Pressing
the left side will turn left, pressing the right side will turn right.
4. Platform Adjustments
- Platform Rotation – To rotate the platform, use the Platform Rotate
control switch to select the direction and hold until desired position is
reached.
- Platform Tilt – To tilt up or down, position the platform/level control
switch up or down and hold until the platform is at desired position.
SPECIFICATIONS