Page 1
SPN800 Spin Bike User Manual [Revision 1.0 April 2017] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
SPN800 Spin Bike Safety Basic precautions, including the following important safety instructions, should always be followed when using this equipment. Read all instructions before use. Before beginning any exercise program, consult your physician. This is especially important for people over 35 years of age or who have pre-existing health problems. Read all instructions before using any fitness equipment.
SPN800 Spin Bike Table of Contents Safety ..............................2 Parts Identification ..........................4 Assembly ............................5 Operation ............................7 Console and Functions ..........................7 Adjusting Effort ............................7 Adjusting the Handlebar ..........................7 Adjusting the Saddle ..........................8 Maintenance and Troubleshooting ....................8 Cleaning and Storage ..........................
SPN800 Spin Bike Parts Identification The equipment comes partially assembled and includes the following parts. Ensure that all parts are included before assembly. Qty. Description Qty. Description Spin Bike (includes frame, crank, Fasteners / Tools: saddle, flywheel etc) 4 M8x90 Coach Screw...
SPN800 Spin Bike Assembly Take all parts out of the carton and place them on a firm, flat surface. Remove all packing materials. Place the front foot (2) (with wheels facing outward) under the front of the frame (1), and place the rear foot (3) under the rear of the frame.
Page 6
SPN800 Spin Bike Secure the handlebar (10) to the handlebar post (11) using 4 M6x20 screws (12) and washers (13), and firmly tighten (rotate right) using the Allen key. Ensure the pulse sensor wires are not trapped or pinched between the handlebar and post during assembly.
SPN800 Spin Bike Operation Console and Functions The equipment features a display that provides you with workout information, such as duration, speed, distance travelled etc. Whenever the console is activated, a new “session” starts, with all values at "zero". If the equipment is not being used and the console is not touched (buttons pressed), it will automatically switch off after approximately 4 minutes.
SPN800 Spin Bike Adjusting the Saddle For a more comfortable “ride” and to suit riders of different sizes, the equipment features multiple saddle adjustments, including height, angle and distance from the handlebar. • To adjust height, loosen (rotate left) the seat post knob (4) a little, then pull on so that the pin in the knob disengages from the locating hole (5) in the seat post.
SPN800 Spin Bike Warm-Up and Cool-Down Routine The warm-up routine is an important part of any workout. The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before aerobic exercising. It should begin every session to prepare your body for more strenuous exercise by heating up and stretching your muscles, increasing your circulation and pulse rate, and delivering more oxygen to your muscles.
Need help?
Do you have a question about the SPN800 and is the answer not in the manual?
Questions and answers