Advertisement
Advertisement
Table of Contents
Related Manuals for Black & Decker HPL10IM
Summary of Contents for Black & Decker HPL10IM
- Page 1 HPL10IM...
-
Page 3: Intended Use
(Original instructions) ENGLISH Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker impact wrench has been designed for sense when operating a power tool. Do not use a screwdriving and nut setting applications. This tool is intended power tool while you are tired or under the influence for consumer use only. - Page 4 ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or Hold power tool by insulated gripping surfaces when binding of moving parts, breakage of parts and any performing an operation where the fastener may other condition that may affect the power tools contact hidden wiring.
- Page 5 (Original instructions) ENGLISH Impairment of hearing. Chargers Health hazards caused by breathing dust developed when Use your Black & Decker charger only to charge the bat- using your tool (example:- working with wood, especially tery in the tool with which it was supplied. Other batteries oak, beech and MDF.) could burst, causing personal injury and damage.
- Page 6 ENGLISH (Original instructions) Fitting and removing a screwdriver bit or Charger diagnostics socket(fig. D) If the charger detects a weak or damaged battery, the charg- This tool is fitted with a quick release chuck to allow for an ing indicator (10) will flash red at a fast rate. Proceed as easy exchange of bits.
-
Page 7: Maintenance
Your charger does not require any maintenance apart from regular cleaning. Technical data Warning! Before performing any maintenance on the tool, HPL10IM (H1) remove the battery from the tool. Unplug the charger before cleaning it. 10.8 Voltage Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth. -
Page 8: Ec Declaration Of Conformity
Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 HPL10IM months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair Black &... - Page 11 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
- Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...
Need help?
Do you have a question about the HPL10IM and is the answer not in the manual?
Questions and answers