Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker impact driver has been designed for Safety equipment such as dust mask, non-skid safety screwdriving applications. This tool is intended for consumer shoes, hard hat, or hearing protection used for use only.
Page 4
g. Use the power tool, accessories and tool bits etc., - In case of skin or eye contact, follow the instructions in accordance with these instructions and in the below. manner intended for the particular type of power tool, taking into account the working conditions Warning! The battery fluid, a 25-30% solution of potassium and the work to be performed.
Assembly To select forward rotation, push the forward/reverse Warning! Before assembly, remove the battery from the tool. slider (2) to the left. To select reverse rotation, push the forward/reverse slider Fitting and removing the battery (fig. B) to the right. To fit the battery (4), line it up with the receptacle on the To lock the tool, set the forward/reverse slider into the tool.
EC declaration of conformity Separate collection of used products and packaging allows materials to be recycled and used again. XTC12IK Re-use of recycled materials helps prevent Black & Decker declares that these products conform to: environmental pollution and reduces the demand for EN 60745, EN 50260, EN 55014, EN 60335, EN 61000 raw materials.
Page 7
Register your product on-line now at www.blackanddecker.co.uk/xt to qualify for the extended warranty (3 years), and to be kept up to date on new products and special offers. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent.
Page 8
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...