BMW G 650 XMOTO Manual page 92

Insert bulb socket 1 into the
headlight housing.
Install the headlight housing
( 84)
Replacing turn indicator
bulbs, front and rear
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1.
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
8
87
z