BMW G 650 XMOTO Manual page 83

8
78
With the lifting lever to the left,
slip the auxiliary stand into po-
sition underneath the motor-
cycle, between the side stand
z
and the rear wheel.
On the left-hand side, slip
stud 1 half-way into mount 2.
On the right-hand side,
pull stud 3 all the way into
mount 4.
Push split pin 5 into the hole.
Bring the motorcycle to the
upright position, so that the
auxiliary stand is lying flat on
the ground.
Press the lifting lever down to
the ground.