BMW G 650 XMOTO Manual page 79

8
74
Insert axle 5 until seated.
Threaded fasteners not
tightened to the specified
torque can work loose or their
z
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Tighten right axle clamping
screws 4 to the specified tight-
ening torque.
Front-axle retainer
10 Nm
Remove the front-wheel stand.
Install axle screw 3 and tight-
en to the specified tightening
torque.
Nut on quick-release
axle, front
80 Nm
Without operating the brakes:
firmly compress the forks and
release; repeat the procedure
several times.
Tighten left axle clamping
screws 2 to the specified
tightening torque.
Front-axle retainer
10 Nm
with OE BMW Motorrad ABS:
Seat the ABS sensor in the
holder and install screw 1 of
the ABS sensor.
Remove the auxiliary stand.