BMW G 650 XMOTO Manual page 77

Mask off the parts of the wheel
8
rim that could be scratched in
the process of removing the
72
brake caliper.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
z
have been removed.
Carefully pull the brake caliper
back and out until clear of the
brake disc.
with OE BMW Motorrad ABS:
When removing the left brake
caliper, take care not to dam-
age the ABS sensor cable.
Place the motorcycle on a suit-
able auxiliary stand. BMW Mo-
torrad recommends the BMW
Motorrad auxiliary stand.
Install the auxiliary stand
( 77)
with OE BMW Motorrad ABS:
Remove screw 1 of the ABS
sensor and remove the ABS
sensor from the holder.
Use a suitable auxiliary stand to
lift the front wheel. BMW Mo-
torrad recommends the BMW
Motorrad front wheel stand.
Install the front wheel stand
( 79)
Slacken left axle clamping
screws 2.
Remove axle screw 3.
Slacken right axle clamping
screws 4.
Working from the left, push
axle 5 in until it projects from