Page 2
PERMITS: Be aware that many areas require special permits and/or utility approvals to install EV charging equipment. Contact your local electrical inspector’s office and your local utility prior to beginning work to understand local requirements. WARRANTY: See Siemens’ standard terms and conditions below with regards to warranty of purchase. www.usa.siemens.com/VersiChargeWarranty...
Page 3
Siemens sales office or Siemens Customer Service available at 1- 800-SIEMENS. The contents of this Instruction Manual shall not become part of or modify any prior or existing agreement, commitment, or relationship.
Page 5
Siemens VersiCharge™ VersiCharge units sold separately Features: Single or dual mount pedestal Siemens VersiCharge standard bolt pattern 4” Aluminum pedestal post - .120” thick Aluminum pedestal base - 3/4” thick Powder coated with primer undercoat for environmental durability Pedestal doubles as an electrical raceway...
Page 6
75°C copper wire to connect to supply circuit. Ensure breaker is off during all electrical work. All pedestals shall be factory predrilled for installing two (2) Siemens VersiCharge EVSE units. The post product is compatible with the VC30GRYU product, the VCSG30GRYUW product and the VCSG30GCPUW product. Installation height is regulated by NEC®;...
Need help?
Do you have a question about the VCPOSTGRY2 and is the answer not in the manual?
Questions and answers