Seat - BMW F 800 R Rider's Manual

Beam-throw basic setting
Slacken screws 1 on left and
right.
Tilt the headlight slightly
about its horizontal axis until
arrowhead 2 is pointing toward
marker 3.
Tighten screws 1 on left and
right.

Seat

Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key to the left in seat
lock 1 and hold it in this pos-
ition while pressing down the
rear part of the seat.
Lift the seat at the rear and
release the key.
Remove the seat and place it,
upholstered side down, on a
clean surface.
Installing seat
Engage the seat in holder 2.
Firmly press down on the seat
at the rear.
The seat engages with an aud-
ible click.
4
51
z