BMW F 800 R Rider's Manual page 98

8
94
Slip spacing bushing 3 onto
the left-hand side of the wheel
hub.
The front wheel must be
z
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and tight-
en to specified torque.
Quick-release axle in fork
leg
50 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.
Clamp of quick-release
axle
20 Nm
Remove the front-wheel stand.
without centre stand OA
Remove the auxiliary stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 2 of the brake
calipers on left and right to the
specified torque.
Brake caliper on fork leg
30 Nm
Remove the adhesive tape
from the wheel rim.