BMW F 800 R Rider's Manual page 103

in the section entitled "Technical
data".
Replacing low-beam and
high-beam headlight bulb
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1 for the high-
beam headlight or cover 2 for
the low-beam headlight.
Disconnect plug 3.
Disengage spring clips 4 from
the fastenings and swing them
aside.
Remove bulb 5.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
8
99
z