Front-Wheel Stand - BMW F 800 R Rider's Manual

brake caliper and the rear
wheel.
Make sure that the axle fits in-
to the recess of the adjusting
plate.
Install right adjusting plate 5.
Install nut 2, but do not tighten
it at this point.
without centre stand OA
Remove the auxiliary stand.
Insert the speed sensor into
the bore and install screw 1.
Adjust the chain sag (

Front-wheel stand

Installing front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
resting only on the front wheel
stand and the rear wheel can
topple.
Place the motorcycle on an aux-
iliary stand before lifting the front
wheel with the BMW Motorrad

front-wheel stand.

Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxiliary
stand.
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
90).
Use basic stand (0 402 241)
with front-wheel adapter
(0 402 242).
8
97
OA
z