Subscribe to Our Youtube Channel
Related Manuals for Total THTLI40028 Series
Summary of Contents for Total THTLI40028 Series
- Page 1 PRODUCT MANUAL LITHIUM-ION HEDGE TRIMMER THTLI40028 THTLI40028xy UTHTLI40028 UTHTLI40028xy x(blank,1,2,3,4,5,6,7,8,9,E,S,A,M) y(blank,-1,-2,-3,-4,-5,-6,-7,-8,-9,E,S,A,M)
-
Page 2: General Power Tool Safety Warnings
| English Original Instructions GENERAL POWER TOOL SAFETY WARNINGS ⚠ WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 3 | English 3) Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 4 | English pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 5 | English Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
- Page 6 | English BATTERY TOOL SAFETY WARNINGS Save these instructions. ⚠ CAUTION Only use genuine original batteries. Use of non-genuine batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. It will also void the warranty for the tool and charged and dark areas invite accidents.
- Page 7 | English dirty. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer's instructions or equipment manual for proper charging instructions. Do not leave a battery on prolonged charge when not in use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries times to obtain maximum performance.
- Page 8 | English Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out.
- Page 9 | English that its activities comply with the applicable regulations. Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your product needs replacement, or if it is of no further use to you, do not dispose of it with household waste.
- Page 10 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated for additional protection Read the instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
- Page 11 | English Do not expose to rain. Do not dispose of batteries, Return exhausted batteries to your local collection or recycling point. Keep hands away Remove battery from the socket before carrying out any adjustment, servicing or maintenance. Wear protective gloves. Fail-safe transformer.
-
Page 12: Additional Safety Warning
| English ADDITIONAL SAFETY WARNING Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned off. A moment of inattention while operating the hedge trimmer may result in serious personal injury. - Page 13 | English Disconnect battery from the machine before： cleaning or when clearing a blockage; checking, maintenance or working on the machine While operating the machine always be sure of a safe and secure operating position especially when using steps or a ladder; Do not attempt to repair the machine unless you are qualified to do so;...
-
Page 14: Intended Use
| English and fixed parts of the machine 27. Do not try to grasp or remove hedge clippings when the hedge trimmer is running. Only remove hedge clippings when the appliance is switched off. 28. Carry the hedge trimmer at the handle while the cutter blade is not running. Always ensure guard supplied is fitted when transporting or storing the hedge trimmer. -
Page 15: Specifications
| English SPECIFICATIONS Rotating Rear Handle Blade Battery Pack Blade Sheath Front Handle Locking Switch For Rotating Rear Switch Lever Front Switch Lever (All Around Switch Function) 10. Battery Pack Release Button* Safety Guard (See Figure C) Not all the accessories illustrated or described are included in standard delivery. Symbols The followings show the symbols used for tool. -
Page 16: Technical Specifications
Specifications and battery cartridge may differ from country to country. Weight, with battery cartridge. Noise Information A weighted sound =80.99dB pressure A weighted sound power =89.62dB Uncertainty K=2.98dB Vibration Information Vibration total values (triax vector sum) determined according to EN 62841: Front handle: 4.009m/s² Real handle: 2.878m/s²... - Page 17 | English Uncertainty K = 1.500m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. ⚠ WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the...
- Page 18 | English INTENDED USE The machine is intended for cutting and trimming hedges and bushes in domestic use. ⚠ Warning! Only use original battery pack and battery charger as below for this power tool: x (blank, 1, 2, 3, 4, 5, 6, 7, 8, 9, E, S, A, M) y (blank, -1, -2, -3, -4, -5, -6, -7, -8, -9, E, S, A, M) TFBLI2001 TFBLI2002...
- Page 19 | English OPERATION PICTURE 90° 45° 0° 180°...
- Page 20 | English OPERATION PICTURE...
-
Page 21: Function Description
| English FUNCTION DESCRIPTION ⚠ NOTE: Before using the tool, read the instruction book carefully. ⚠ WARNING! Do not use the product without attaching the guard and front handle. Assembly & operation Checking the battery charge condition (See Figure A) NOTE: Fig. -
Page 22: Maintenance
| English Always make sure the locking switch is locked before starting the hedge trimmer. Top cutting (See Figure I) ⚠ WARNING: If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury. -
Page 23: Environmental Protection
| English There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. - Page 24 | English MAINTENANCE&MALFUNCTIONS Possible malfunctions and methods of their eliminations Malfunction Probable causes Actions Hedge cutter does not Battery discharged Recharge battery operate Battery not fully connected Ensure battery locking button engaged Hedge cutter operates Internal wiring garden tool Contact Service intermittently defective...
- Page 25 TOTAL TOOLS WORLD MADE IN CHINA T0723.V02 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the THTLI40028 Series and is the answer not in the manual?
Questions and answers