Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Total TGTLI20301
Summary of Contents for Total TGTLI20301
- Page 1 BATTERY TRIMMER...
-
Page 2: Safety Instructions
Safety instructions Warning Read all safety warnings and all instructions. Failure to follow the warnings and instructions can result in battery discharge, fire and / or serious injury. Save all warnings and instructions for future reference. Note: The term "cordless tool" in the warnings refers to your cordless (cordless) tool. Due to our ongoing research, development and innovation program, specifications in this document are subject to change without notice. - Page 3 Do not overdo it. Maintain posture and balance at all times. This allows for better control of the power tool in unexpected situations. Use of suitable PPE Wear personal protective equipment. Always wear eye protection. • Protective equipment such as a dust mask, non-slip safety shoes, hard hat or hearing protection used in proper conditions will reduce personal injury.
- Page 4 affect the operation of cordless tools. If it is damaged, have the cordless tool repaired before using it. Many accidents are caused by poorly maintained battery tools. Keep accessories clean and sharp, as with proper maintenance they are less likely to bind and are easier to control. 5) Service a.
- Page 5 Safety rules for correct use Read the instruction manual. Wear eye protection Wear ear protection Do not use it in the rain or leave it outdoors while it is raining. Keep bystanders away The operator must ensure, during the work, that no people or animals come within 15 m Noise emission into the environment according to the Directive.
-
Page 6: Additional Safety Warnings
Additional safety warnings Do not allow people without experience and knowledge to use the tools, unless they have been supervised or instructed in the use of the device by a person responsible for their safety. Children must not use the tool. Before using Please read the instructions carefully. - Page 7 Store the equipment in a lockable area so that it is out of the reach of children • and unauthorized persons. Always keep hands and feet away from the cutting area, especially when starting • the engine. Never use the machine if you are tired, if you are not 100% trained or if you are •...
-
Page 8: Technical Data
Attention This machine produces an electromagnetic field during its operation. Safe operation of this machine is only possible when the operational or safety information has been completely read and the instructions contained therein have been strictly followed. Save the instructions A lawn mower can be dangerous if used incorrectly or negligently and can cause serious injury to the operator or bystanders. -
Page 9: Product Description
Product description 1. Trimmer / edge trimmer switch button 6. Start Trigger 2. Extendable bar 7. Protective cover 3. Adjustable front handle 8. Cutting head 4. Trigger lock 9. Protective clip 5. ergonomic handle Note 2: Not all accessories illustrated or described in this manual are required to be included in the standard supply. -
Page 10: Assembly And Commissioning
Start trigger / switch (6) The switch trigger, located under the handlebar or rear handle, and the lock button, located behind the auxiliary handle, must be pressed simultaneously to allow the blade to rotate. Assembly and commissioning Unpacking This product requires assembly. •... - Page 11 Firmly grasp the handle or handle (2). • • Pull the battery out of the handle. Warning Follow these instructions to prevent injury and reduce the risk of electric shock or fire: • Replace the battery or charger immediately if the battery case or charger cable is damaged.
- Page 12 Use tips • Hold the trimmer with your right hand on the rear handle and your left hand on the front handle. Maintain a firm grip with both hands as you run. • • The trimmer should be held in a comfortable position with the rear handle at hip height.
- Page 13 1. Dangerous cutting area 2. Better cutting area 3. Direction of rotation Front handle adjustment or adjustable front handle (3) (Fig. 9) The inclination of the front handle can be adjusted in 2 steps from 30 ° (straight) to 90 ° and in 3 steps from 90 °...
-
Page 14: Maintenance And Cleaning
Working with the protection band (9) Remember: the machine head may continue to rotate briefly after the edge cutter is turned off. Wait for the print head to come to a complete stop before adjusting the guard. Do not adjust it with your foot. The guard clamp can limit the cutting radius of the cutting line and reduce the risk of the rotating cutting line being damaged. - Page 15 Push the tabs on the side of the spool retainer. • Move the bobbin stopper up to remove it. • Remove the coil. • • To install the new spool, make sure the nylon is held in the opposite grooves of the new spool.
- Page 16 Stay away from corrosive agents such as garden chemicals and antifreeze salts. • Note: If you are unsure of the required maintenance, how to perform it or perform other repairs not described in this manual, have it performed by an official Total dealer.
-
Page 17: Troubleshooting
Troubleshooting From the charger while charging LED indicator possible error Possible solution temperature Use the charger only when the ambient flashing red led deviation temperature is between 5 ° C and 40 ° C Red LED on Contact your service agent Note: If you still can't get your tool to work, contact your service agent. -
Page 18: Exploded View
Exploded view... - Page 19 BATTERY TRIMMER...
Need help?
Do you have a question about the TGTLI20301 and is the answer not in the manual?
Questions and answers