Related Manuals for Total TPHT201601
Summary of Contents for Total TPHT201601
- Page 1 PRODUCT MANUAL LITHIUM-ION POLE SAW WITH POLE HEDGE TRIMMER LITHIUM-ION POLE HEDGE TRIMMER TPHT201601 [P1-P23] LITHIUM-ION POLE SAW TPSLI20081 [P24-P39]...
-
Page 2: General Power Tool Safety Warnings
| English Original Instructions GENERAL POWER TOOL SAFETY WARNINGS ⚠ WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 3 | English 3) Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 4 | English pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Page 5 | English Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
- Page 6 | English BATTERY TOOL SAFETY WARNINGS Save these instructions. ⚠ CAUTION Only use genuine original batteries. Use of non-genuine batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. It will also void the warranty for the tool and charged and dark areas invite accidents.
- Page 7 | English dirty. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer's instructions or equipment manual for proper charging instructions. Do not leave a battery on prolonged charge when not in use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries times to obtain maximum performance.
- Page 8 | English Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out.
- Page 9 | English that its activities comply with the applicable regulations. Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your product needs replacement, or if it is of no further use to you, do not dispose of it with household waste.
- Page 10 | English THE SYMBOLS IN INSTRUCTION MANUAL Do not expose to rain. Read the instruction manual before using. Warning: Beware of thrown objects. Safety alert. Please only use the accessories supported by the manufacturer. Do not use the charger if the cord is damaged. Keep sufficient distance to electric power lines.
- Page 11 | English ADDITIONAL SAFETY WARNING Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
- Page 12 | English physical, sensory or mental cap- abilities, or lack of experience and knowledge, unless they have been given super vision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. When working with the machine, always hold it firmly with both hands and provide for a secure stance.
- Page 13 | English Never hold the hedge trimmer by the guard. When operating the hedge trimmer, ensure to keep proper footing and balance at all times. Always be aware of your surroundings and stay alert for possible hazards that ...
-
Page 14: Maintenance
| English The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat. Do not short-circuit the battery. There is a risk of explosion. ... -
Page 15: Specifications
| English SPECIFICATIONS Read all safety warnings and all instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. The numbering of the product features refers to the illustration of the product on the graphics pages. -
Page 16: Technical Specifications
Typically, the A-weighted noise levels of the product are: Sound power dB(A) 92.81 Uncertainty K Wear hearing protection! Maximum extension length Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-1+EN 62841-4-2 Front handle: ah 1.295 Rear handle: ah 1.421 Uncertainty K... - Page 17 | English in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). ⚠ WARNING! Only use original battery pack and battery charger as below for this power tool:...
- Page 18 | English OPERATION PICTURE...
- Page 19 | English OPERATION PICTURE...
-
Page 20: Function Description
| English FUNCTION DESCRIPTION For your safety Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is danger of injury when unintentionally actuating the ON/OFF switch with the locking button. -
Page 21: Operation
| English Adjusting the pivoting head (see Figure G) Press the pivoting head adjustment button (2), adjust the pivoting head to the required position by moving the hedge trimmer head upwards or downwards, release the pivoting head adjustment button (2) and make sure that the hedge trimmer head is properly locked. - Page 22 | English Blade maintenance Lubricate blade before and after each usage with recommended lubricant spray. Storage and transportation Store and transport cordless pole hedge trimmer with battery removed and protection blade cover fitted. Battery maintenance Use the following procedures to enable optimum usage of the battery: ...
- Page 23 | English MAINTENANCE&MALFUNCTIONS The following chart lists problem symptoms, possible causes and corrective action, if your machine does not operate properly. If these do not identify and correct the problem, contact your service agent. ⚠ WARNING! Switch off and remove the battery prior to any troubleshooting. Problem Possible cause Corrective measure...
- Page 24 | English THE SYMBOLS IN INSTRUCTION MANUAL Do not expose to rain. WARNING: Beware of thrown objects. WARNING: Keep bystanders away. Wear eye and head protection. Wear slip-resistant footwear. Wear hand protection. Remove battery before adjusting or cleaning, and before leaving the machine unattended for any period.
- Page 25 | English ADDITIONAL SAFETY WARNING Keep all parts of the body away from the saw chain. Do not remove cut material nor hold material to be cut when the saw chain is moving. Make sure the tool is switched off and the battery is removed when clearing jammed material.
-
Page 26: Causes And Operator Prevention Of Kickback
| English Causes and operator prevention of kickback Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. - Page 27 | English ground. Cut longer branches in sections. (See Figure J) Reduce force before the branch is completely cut off. You can get injured when losing balance and control of the pruner. Do not hang the product in a tree when you are not using it. Always place the tool on the ground in a safe place without removing the battery.
- Page 28 | English Maintenance Remove battery before adjusting or cleaning, and before leaving the machine unattended for any period. Always wear gardening gloves when handling or working near the saw chain. Inspect the product and replace worn or damaged parts for safety. Make sure all nuts, bolts and screws are tight to ensure safe working with the product.
- Page 29 | English SPECIFICATIONS Read all safety warnings and all instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. 1. Saw chain 11. Extended gripping area Chain bar (insulated) Oil filler cap 12.
- Page 30 Typically, the A-weighted noise levels of the product are: Sound pressure level dB(A) 92.42 Uncertainty K 1.58 Vibration total values ah (trial vector sum) and uncertainty K determined according to EN 62841-1 Vibration emission value ah m/s² 1.633 Uncertainty K m/s²...
- Page 31 | English ⚠ WARNING! Only use original battery pack and battery charger as below for this power tool: Product Battery pack Model No. Type Rated voltage Rated capacity TFBLI2001 2.0Ah TFBLI2001xy TFBLI2002 Lithium-Ion 18.5V d.c., 20V Max 4.0Ah TFBLI2002xy TFBLI2053 5.0Ah TFBLI2053xy Model No.
- Page 32 | English OPERATION PICTURE...
- Page 33 | English...
-
Page 34: Starting Operation
| English OPERATION Starting operation For your safety Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is danger of injury when unintentionally actuating the On/Off switch with the locking button. - Page 35 | English Unscrew the knob on the cover and remove the cover. Slide the new saw chain in the slot around the chain bar. Ensure correct running direction of saw chain. For this, compare the saw chain with the rotation symbol on the bar.
- Page 36 | English Screw oil filler cap on again. Clean any spilled oil remaining on the tool with a cloth. Make sure that the oil cap is not overtightened. Run the pole pruner for 30 seconds to pump oil into the system. NOTE: To allow venting of the oil reservoir, small breather channels are provided in the oil filler cap.
- Page 37 | English Maintenance and service Maintenance, storage and transportation (See Figure K,L) Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is danger of injury when unintentionally actuating the On/Off switch with the locking button.
-
Page 38: Troubleshooting
| English Disposal The product, batteries, accessories and packaging should be sorted for environmentally friendly recycling. Do not dispose of the product and batteries/rechargeable batteries into household waste! Troubleshooting Pole pruner Is the oil reservoir filled? Check oil level gauge prior to starting and regularly during operation. - Page 39 | English MAINTENANCE&MALFUNCTIONS Possible malfunctions and methods of their eliminations Problem Possible Cause Corrective Measure No oil in reservoir Refill oil Saw chain dry Oil passage clogged Clean oil passage No oil in reservoir Refill oil Vent in oil filler cap clogged Clean oil filler cap Oil passage clogged Clean oil passage...
- Page 40 TOTAL TOOLS WORLD MADE IN CHINA T0923.V01 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TPHT201601 and is the answer not in the manual?
Questions and answers