Total TP445441 User Manual

Total TP445441 User Manual

Gasoline grass trimmer 45cc 17 inch

Advertisement

GASOLINE GRASS TRIMMER
TP445441
45cc 17"
45cc 17"

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP445441 and is the answer not in the manual?

Questions and answers

Summary of Contents for Total TP445441

  • Page 1 GASOLINE GRASS TRIMMER TP445441 45cc 17" 45cc 17"...
  • Page 2: Safety Rules & Precautions

    SAFETY RULES & PRECAUTIONS Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do not permit others to use this machine unless they are thoroughly responsible and have read, and understand the machine manual and are trained in its operation.
  • Page 3 Always use proper handles and shoulder strap when cutting. Do not smoke while mixing fuel or filling tank. Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation. Always mix and store the fuel in a properly marked container that is approved by local codes and ordinances for such usage.
  • Page 4 ventilated area only. Ensure safe and proper performance of your product. These part are available from your dealer. The use of any other accessories or attachments may cause a potential hazard or injury to the user, damage to the machine and void this warranty. Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
  • Page 5 Always wear ear protection, loud noise for long time can make hearing debase even lost hearing. Total face and head protection must be wear to prevent damage from plummet or branch. Wear no-slip heavy duty work gloves to improve your grip on the brush cutter handle.
  • Page 6 Because a trimmer/cutter is a high-speed, fast cutting power tool, special safety precaution must be observed to reduce the risk of personal injury. Read this manual carefully. Be familiar with the controls and the proper use of the unit. Know how to shut it off, and how to unhook a harnessed unit quickly.
  • Page 7: Technical Data

    Illustrations may include optional equipment and accessories, and may not include all standard equipment. TECHNICAL DATA -------------- --------------- TP445441 Centrifugal Clutch; Remote type flexible shaft Maximum speed of cutter head 10000...
  • Page 8 Accessories included: 1set line spool 1pcs debris shield, 1pcs cutting blade (230mm) 1pcs oil bottle 2pcs debris shields, 1pcs carrying bag 1pcs wrench, 2pcs hex keys...
  • Page 9 SAFETY MANUAL included with unit. Read before operating and keep for future reference to learn proper, safe operating techniques. 1. BLADE 3Z blade for grass, weed or brush cutting applications. Harness and metal shield are required for blade operation. 2. METAL BLADE SHIELD is always required on the machine equipped with metal blade.
  • Page 10: Installing Handle

    ASSEMBLY INSTRUCTIONS INSTALLING THE LOWER SHAFT Pack the aluminum tube into the connector inside, make the convex ball aim at the hole on connector Then turning the knob clockwise until it is tight INSTALLING HANDLE Install handle in bracket. Position handle in a comfortable operating position and tighten two bolts.
  • Page 11 INSTALLING SHIELD & BLADE Fit the metal shield to the gear box housing. Using three screws and secure to box housing. Fit the lining to the gear box housing. Secure metal blade between upper and lower plate with nut. Make sure that cotter pin is installed.
  • Page 12: Rules For Safe Operation

    Do not wear open-toed footwear, or go bare-foot or bare legged. In certain situations you must wear total face and head protection. DANGER ZONE NO PERSON EXCEPT OPERATOR ALLOWED 15 METERS RADIUS DANGER ZONE. EYE, EAR, FACE, FOOT, LEG AND BODY PROTECTION MUST BE WORN BY OPERATOR.
  • Page 13: Cutting With A Nylon Head

    CUTTING WITH A NYLON HEAD WARNIN DANCER The proper debris shield must be in place on the unit when nylon cutting line is used, The cutting line can flap around if too much line is exposed. Always use the plastic debris shield with cut-off knife when using nylon cutting heads.
  • Page 14 CUTTING WITH A NYLON HEAD TRIMMING: This is feeding the trimmer carefully into the material you wish to cut. Tilt the head slowly to direct debris away from you. If cutting up to a barrier such as fence, wall or tree, approach from an angle where any debris ricocheting off the barrier will fly away from you, Move the line head slowly until the grass is cut right up the barrier, but...
  • Page 15: Cutting With A Blade

    CUTTING WITH A BLADE 3-tooth metal blade and 8-tooth metal blade are provided with the machine The metal blade is used for cutting brush and weeds up to 3/4” in diameter. Use of saw blade with this machine is prohibited. WARNING DANGER WARNING...
  • Page 16 . This is cutting by swinging the blade in a level arc. It can quickly clear areas of field grass and weeds. Scything should not be used to cut large, tough weeds or woody growths. Do not use a brush blade to cut trees which exceed a diameter of 1/2 to 3/4 inches.
  • Page 17: Fuel & Oil Mixture

    FUEL & OIL MIXTURE Never fill the fuel tank to the very top. Never add fuel to the tank in a closed non-ventilated area. Do not add fuel to this unit close to an open fire or sparks. Be sure to wipe off spilled fuel before attempting to start engine. Do not attempt to refuel a hot engine.
  • Page 18: Preparing For Operations

    PREPARING FOR OPERATIONS WHEN MIXING GASOLINE WITH TWO CYCLE ENGINE OIL, USE ONLY GASOLINE WHICH CONTAINS NO ETHANOL OR METHANOL (TYPES OF ALCOHOL). THIS WILL HELP TO A VOID POSSIBLE DAMAGE TO ENGINE FUEL LINES AND OTHER ENGINE PARTS. DO NOT MIX GASOLINE AND OIL DIRECTLY IN THE ENGINE FUEL TANK.
  • Page 19: Engine Starting And Stopping Procedures

    OPERATIONS ENGINE STARTING AND STOPPING PROCEDURES STARTING COLD ENGINE Move the stop switch to “START” position. 1. Give a gentle push on the primer pump repeatedly (7-10times) until fuel comes into the primer pump. 2. Cold Starts: Pull lever up to close choke. 3.
  • Page 20: Maintenance And Care

    MAINTENANCE & CARE AIR FILTER Accumulated dust in the air filter will reduce engine efficiency. Increase fuel consumption and allow abrasive particles to pass into the engine. Remove the air filter as often as necessary to maintain in a clean condition. Light surface dust can readily be removed by tapping the filter.
  • Page 21: Troubleshooting

    TROUBLE SHOOTING Clean or replace the plug if fouled with heavy oily deposits. Replace the plug if the center electrode is worn rounded at the end. Spark gap 0.6-0.7mm (.023 .028 ) Fastening torque = 145-155kg.cm (125-135in.lb) WARNING: Always cover the metal blade with the transportation guard while transportation and storage.
  • Page 22: Troubleshooting Guide

    TROUBLESHOOTING GUIDE 1. FAILURE TO START symptom probable cause remedy fuel these is no fuel in tank Add fuel in tank system fuel filter obstruct Clean fuel filter abnormality spark plug instead fuel spark fuel is too dirty fuel instead fuel normal there is water in fuel system...
  • Page 23: Low Output

    TROUBLESHOOTING GUIDE 2. LOW OUTPUT symptom probable cause remedy flameout when speedup fuel filter obstruct, clean fuel filter clean fuel fall short of fuel road the smoke is thin, muffler fouled with oily adjust carburetor carburetor spout backward deposits clean the oily deposits compress press is shortage piston piston ring replace piston piston ring...
  • Page 24 TP445441 Spare Part List Description Description Lower plate Join setsubaaembly 1.42 Blade Engine(1E40F-5A/43CC) 1.43 Upper plate Button 1.44 Bush Pull-out piece spring B 1.45 Guard shield of blade Handle A 1.46 Driven shaft 1.47 Driven gear lnsurance of the trigger 1.48...
  • Page 25 TP445441 Exploding view...
  • Page 26 TP445441 Engine Spare Part List Description Description screw M5*20 fuel vitta 2.33.3 fuel tank rack vitta seat 2.33.4 rubber sleeve fuel vitta 2.33.5 starter assemble oil box cover assemble 2.33.6 clasp oil box cover 2.4.1 2.33.6.1 handle oil box sheet gasket 2.4.2...
  • Page 27 TP445441 Engine Exploding view...
  • Page 28 GASOLINE GRASS TRIMMER www.totaltools.cn TOTAL TOOLS CO.,LIMITED MADE IN CHINA T1212.V01 45cc 17" 45cc 17"...

Table of Contents

Save PDF