HOMCOM 800-231V70 Instruction Manual page 3

26. If the power cord is damaged, in order to avoid danger, it must be replaced by
professionals from the manufacturer, its maintenance department or similar
departments.
27. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning used of the appliance in
a safe way and understand the hazards involved.
28. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children unless they are older than 8 and supervised.
29. Keep the appliance and its cord out of reach of children less than 8 years.
30. The appliances are not intended to be operated by means of an external timer or
separate remote-control system.
BEFORE FIRST USE
- Clean all parts with a damp cloth.
- Ensure the appliance is dry before dehydrating the food.
- Ensure all parts are fitted correctly and are in working condition.
PREPARING THE FOOD
To achieve the best quality dehydrated food, follow these guidelines:
- Use high-quality food: Ensure the food is fresh and in good condition.
- Choose tree-ripened fruits: They contain the highest natural sugar content.
- Avoid over-ripe or rotten produce: Remove any bruised or discoloured parts before
dehydrating.
- Pre-treatment: Some fruits like apples, pears and apricots can be pre-treated to slow
vitamin loss and prevent discolouration.
- Wash thoroughly: Clean all food to remove dirt, bacteria and other harmful substances.
- Peeling: Peeling fruits and vegetables are optional but can prevent tough skins after
drying.
- Blanching vegetables: Some vegetables may need to be steamed or blanched due to
their different textures.
ASSEMBLING THE DEHYDRATOR
1. Set the dehydrator on a smooth, level surface, ensuring the power cord can safely
reach the electrical outlet.
2. Cut and prepare the ingredients as instructed. Place them on the dehydrating trays
or sheets.
3. Stack the trays onto the main body of the appliance. Ensure all trays are fitted
correctly and evenly stacked.
4. Switch on the main electrical power supply.